How to Make a Frame with Edge Banding218

Edge banding is a thin strip of material that is applied to the edges of plywood or MDF to give it a finished look. It is available in a variety of materials, including wood, plastic, and metal. Edge banding can be applied using a variety of methods, but the most common method is to use an edge bander machine.

Edge bander machines are designed to apply edge banding to the edges of panels quickly and efficiently. They typically have a heated roller that melts the adhesive on the back of the edge banding and a pressure roller that presses the edge banding onto the panel. Edge bander machines can be used to apply edge banding to straight edges or curved edges.

If you do not have access to an edge bander machine, you can also apply edge banding by hand. To do this, you will need to use a hot iron to melt the adhesive on the back of the edge banding and a roller to press the edge banding onto the panel. You can also use a hand-held edge bander, which is a small tool that is designed to apply edge banding by hand.

Once the edge banding has been applied, you can trim it to the desired length using a utility knife or a flush trim saw. You can also sand the edge banding to smooth it out and make it flush with the surface of the panel.

Here are the steps on how to make a frame with edge banding:
Cut the pieces of wood to the desired length and width.
Apply wood glue to the edges of the wood pieces.
Assemble the frame and clamp it together.
Allow the glue to dry completely.
Apply edge banding to the edges of the frame using an edge bander machine or by hand.
Trim the edge banding to the desired length.
Sand the edge banding to smooth it out and make it flush with the surface of the frame.

Once the frame is complete, you can finish it with paint, stain, or clear varnish.

Tips for Applying Edge Banding
Use a sharp utility knife or flush trim saw to trim the edge banding.
Sand the edge banding to smooth it out and make it flush with the surface of the panel.
If you are using an edge bander machine, make sure that the temperature of the heated roller is set correctly. The adhesive on the back of the edge banding should melt evenly without burning.
If you are applying edge banding by hand, be sure to apply even pressure to the roller to ensure that the edge banding is applied smoothly and securely.

2025-01-27

Previous：How to Cut Edge Banding for Woodworking

Next：How to Adjust Edgeband Thickness