How to Remove Edge Banding Glue from Furniture159

Edge banding is a thin strip of material that is applied to the edges of furniture to give it a finished look. It is typically made of wood, plastic, or metal, and is usually glued in place. Over time, the glue can become loose or damaged, causing the edge banding to peel away from the furniture. If this happens, it is important to remove the old glue and reapply new glue to secure the edge banding.

There are a few different ways to remove edge banding glue. The most common method is to use a heat gun. A heat gun is a tool that uses hot air to soften the glue, making it easier to remove. To use a heat gun to remove edge banding glue, simply hold the heat gun about 6 inches away from the edge banding and move it back and forth until the glue has softened. Once the glue is softened, you can use a putty knife or a scraper to remove it.

If you do not have a heat gun, you can also use a hair dryer to remove edge banding glue. However, a hair dryer will not get as hot as a heat gun, so it may take longer to soften the glue. To use a hair dryer to remove edge banding glue, simply hold the hair dryer about 6 inches away from the edge banding and move it back and forth until the glue has softened. Once the glue is softened, you can use a putty knife or a scraper to remove it.

Another method for removing edge banding glue is to use a chemical solvent. Chemical solvents are available at most hardware stores, and they can be used to dissolve the glue. To use a chemical solvent to remove edge banding glue, simply apply the solvent to the glue and let it sit for a few minutes. Once the glue has dissolved, you can use a putty knife or a scraper to remove it.

No matter which method you use to remove edge banding glue, it is important to be careful not to damage the furniture. If you are not careful, you could scratch or gouge the furniture.

Here are some additional tips for removing edge banding glue:
If the glue is very old or stubborn, you may need to use a combination of methods to remove it.
Be sure to test the solvent on an inconspicuous area of the furniture before using it on the entire surface.
If you are using a heat gun, be sure to hold it about 6 inches away from the furniture to avoid damaging the finish.
If you are using a hair dryer, be sure to move it back and forth over the surface to avoid overheating the glue.
Be patient and take your time. Removing edge banding glue can be a time-consuming process, but it is important to do it correctly to avoid damaging the furniture.

2025-01-27

Previous：Edge Banding or Molding: Which Is Better?

Next：Why Do Wardrobes Have Edge Banding?