How to Change an Edge Banding Molding108

Edge banding is a thin strip of material that is applied to the edges of panels or other substrates to create a finished look. It can be made from a variety of materials, including wood, plastic, and metal. Edge banding is often used to protect the edges of panels from damage and to improve their appearance. It can also be used to create decorative effects.

Edge banding is typically applied using a hot melt adhesive. The adhesive is applied to the edge of the panel and the edge banding is pressed into place. The adhesive will then cool and bond the edge banding to the panel.

In order to change an edge banding molding, you will need to remove the old molding and then install the new molding. The following steps will show you how to do this:

1. Remove the old molding.

To remove the old molding, you will need to use a sharp knife or a utility knife. Carefully score the adhesive bond between the molding and the panel. Once you have scored the adhesive bond, you can pry the molding away from the panel using a putty knife or a chisel.

2. Clean the edge of the panel.

Once you have removed the old molding, you will need to clean the edge of the panel. Use a clean cloth and some denatured alcohol to remove any remaining adhesive residue. Allow the edge of the panel to dry completely.

3. Apply the new molding.

To apply the new molding, you will need to use a hot melt adhesive. Apply a thin bead of adhesive to the edge of the panel. Then, press the molding into place. Use a rubber mallet or a hammer to tap the molding into place. Allow the adhesive to cool and bond the molding to the panel.

4. Trim the molding.

Once the adhesive has cooled, you will need to trim the molding to the desired length. Use a sharp knife or a utility knife to trim the molding. Be careful not to cut the panel.

5. Finish the molding.

Once the molding has been trimmed, you will need to finish it. You can do this by sanding the molding and then applying a clear finish. The clear finish will help to protect the molding from damage and will give it a professional look.

Tips
When selecting an edge banding molding, be sure to choose one that is the correct size and thickness for your application.
When applying the adhesive, be sure to use a thin bead. Too much adhesive can cause the molding to bubble or wrinkle.
When pressing the molding into place, be sure to use even pressure. This will help to ensure a strong bond between the molding and the panel.
Allow the adhesive to cool completely before trimming the molding. This will help to prevent the molding from chipping or breaking.
When finishing the molding, be sure to use a clear finish that is compatible with the molding material.

2025-01-27

Previous：How to Trim Angled Edge Banding

Next：Can Edge Banding Be Flush?