How to Edge Band the Interior of Drawers152

Edge banding is a process of applying a thin strip of material to the exposed edges of a drawer or other woodworking project. This serves to protect the edges from wear and tear, moisture, and other damage. It can also improve the appearance of the project by giving it a more finished look.

There are two main types of edge banding: solid wood and veneer. Solid wood edge banding is made from a single piece of wood, while veneer edge banding is made from a thin layer of wood that is glued to a backing material. Veneer edge banding is typically less expensive than solid wood edge banding, but it is also less durable.

To edge band the interior of a drawer, you will need the following materials:
Edge banding material
Contact cement
A heat gun or iron
A sharp knife or utility knife
A sanding block

Once you have gathered your materials, you can begin the edge banding process.
Cut the edge banding material to size. The edge banding material should be cut to the same length as the edge of the drawer that you are banding.

Apply contact cement to the edge of the drawer and the edge banding material. Use a thin, even coat of contact cement and allow it to dry for a few minutes.

Apply heat to the edge banding material. Use a heat gun or iron to apply heat to the edge banding material. This will help to activate the contact cement and bond the edge banding to the drawer.

Press the edge banding material into place. Once the edge banding material is heated, press it firmly into place on the edge of the drawer. Use a rubber mallet or a block of wood to apply pressure.

Trim the excess edge banding material. Once the edge banding material is in place, use a sharp knife or utility knife to trim the excess material from the edges of the drawer.

Sand the edges of the drawer. Use a sanding block to sand the edges of the drawer smooth. This will help to remove any rough edges and create a finished look.

Edge banding the interior of a drawer is a relatively simple process that can be completed in a few hours. By following these steps, you can protect your drawers from wear and tear and improve their appearance.

2025-01-29

Previous：Why You Should Not Skip Edge Banding on Your Cabinets

Next：Why Do Drawers Need Edge Banding?