How to Edgeband an Inside Round Edge268

As a leading furniture edgebanding factory in China, we often encounter various edgebanding challenges, including how to edgeband an inside round edge. An inside round edge, also known as a concave edge, is a common design element in furniture, cabinetry, and other woodworking projects. While it can add a touch of elegance and sophistication to a piece, edgebanding an inside round edge can be a tricky task if you don't have the right tools and techniques. In this comprehensive guide, we will provide you with step-by-step instructions and expert tips on how to edgeband an inside round edge like a professional.

Step 1: Prepare the Edgeband

The first step is to prepare the edgeband material. The most common types of edgeband for inside round edges are PVC, ABS, and veneer. Choose an edgeband that matches the thickness of your workpiece and has a radius that is slightly smaller than the inside radius of the edge you are edgebanding. Cut the edgeband to the desired length and apply a thin layer of contact cement to one side.

Step 2: Glue the Edgeband to the Workpiece

Align the edgeband with the edge of the workpiece and press it firmly into place. Use a J-roller or a notched trowel to apply even pressure and ensure that the edgeband is fully adhered to the workpiece. Wipe away any excess contact cement that may squeeze out from the joint.

Step 3: Trim the Excess Edgeband

Once the edgeband is glued in place, you need to trim the excess material. Use a sharp utility knife or a flush trim router to carefully cut away the excess edgeband. Be sure to follow the contour of the inside round edge and make smooth, clean cuts.

Step 4: Sand and Buff the Edgeband

After trimming the excess edgeband, sand the edges of the workpiece to remove any sharp edges or rough spots. Start with a medium-grit sandpaper and gradually work your way up to a fine-grit sandpaper. Once the edges are smooth, buff the edgeband with a soft cloth or a fine-grit sanding sponge to give it a polished look.

Tips for Edgebanding an Inside Round Edge* Use a sharp utility knife or a flush trim router for precise trimming.
* Apply even pressure when gluing the edgeband to ensure a strong bond.
* Use a sanding block or a sanding sponge to prevent gouging or scratching the edgeband.
* For a seamless finish, sand the edgeband in the direction of the grain.
* If the inside radius of the edge is too tight, you may need to use a heat gun to soften the edgeband before applying it.
* Practice on a scrap piece of wood before edgebanding the actual workpiece to get a feel for the techniques and avoid mistakes.

2025-01-29

Previous：How to Repair Wardrobe Edging

Next：How to Edge Seal a Countertop