How to Replace Edging Strips with Reveal Molding for Chinese Furniture38

IntroductionIf you're looking to give your Chinese furniture a fresh look, replacing the edging strips with reveal molding is a great way to do it. Reveal molding is a type of molding that is used to create a small gap between the edge of the furniture and the molding itself. This gap can be used to add a decorative element to the furniture, or it can simply be used to make the furniture appear more finished.
Replacing edging strips with reveal molding is a relatively simple process, but there are a few things you need to keep in mind before you get started. First, you need to make sure that the new reveal molding is the same size as the old edging strips. If the new molding is too large or too small, it will not fit properly and will look unsightly.
Second, you need to make sure that the new reveal molding is made from the same material as the old edging strips. If the new molding is made from a different material, it may not adhere properly to the furniture and may eventually fall off.
Finally, you need to make sure that you have the right tools for the job. You will need a hammer, a nail set, and a saw. If you do not have these tools, you can rent them from a hardware store.
##

Step-by-Step InstructionsOnce you have gathered all of the necessary materials and tools, you can begin replacing the edging strips with reveal molding. Here are the steps involved:
1. Remove the old edging strips. Use a hammer and nail set to carefully pry the old edging strips off of the furniture. Be careful not to damage the furniture in the process.
2. Clean the surface of the furniture. Once the old edging strips have been removed, clean the surface of the furniture with a damp cloth. This will remove any dirt or debris that could prevent the new reveal molding from adhering properly.
3. Apply adhesive to the back of the new reveal molding. Apply a thin layer of adhesive to the back of the new reveal molding. Be sure to apply the adhesive evenly, and do not apply too much.
4. Attach the new reveal molding to the furniture. Press the new reveal molding into place on the furniture. Be sure to align the molding correctly, and press firmly so that it adheres properly.
5. Nail the reveal molding into place. Once the reveal molding is in place, use a hammer and nail set to nail it into place. Be sure to use small nails, and do not drive them in too deeply.
6. Fill any gaps. If there are any gaps between the reveal molding and the furniture, fill them with wood filler. Allow the wood filler to dry completely, and then sand it smooth.
7. Paint or stain the reveal molding (optional). If you want to change the color of the reveal molding, you can paint or stain it. Be sure to use a paint or stain that is compatible with the type of wood that the molding is made from.
##

TipsHere are a few tips for replacing edging strips with reveal molding:
* Use a sharp saw to cut the reveal molding. This will help to prevent the molding from splintering.
* Be careful not to apply too much adhesive to the back of the reveal molding. Too much adhesive can make the molding difficult to position and can cause it to bleed out from the sides.
* Press the reveal molding into place firmly. This will help to ensure that it adheres properly.
* Use small nails to nail the reveal molding into place. Large nails can split the molding.
* Fill any gaps between the reveal molding and the furniture with wood filler. This will help to prevent moisture from getting into the furniture and causing damage.
* Paint or stain the reveal molding to match the furniture. This will help to give the furniture a finished look.

2025-01-29

Previous：How to Install Wardrobe Trim Edge Banding: A Comprehensive Guide

Next：How to Apply Window Edging Strips