How to Apply Glue to Edge Banding165

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particleboard, or other wood-based panels. It is used to cover the unfinished edges, create a finished look, and protect them from moisture and damage. Glue is an essential part of the edge banding process, as it holds the edge banding in place and creates a strong bond between the edge banding and the substrate.
There are two main types of glue that can be used for edge banding:
* Hot melt glue: Hot melt glue is a thermoplastic adhesive that is applied in a molten form. It sets quickly upon cooling, creating a strong bond. Hot melt glue is ideal for high-volume edge banding applications, as it can be applied quickly and efficiently.
* Contact cement: Contact cement is a solvent-based adhesive that is applied to both the edge banding and the substrate. It sets when the two surfaces are brought into contact, creating a permanent bond. Contact cement is ideal for low-volume edge banding applications, as it allows for more time to position the edge banding before it sets.

Choosing the Right GlueThe type of glue that you choose will depend on the specific application. Here are a few factors to consider:
* The type of edge banding material: Some edge banding materials, such as PVC, require a specific type of glue. Be sure to check the manufacturer's instructions before choosing a glue.
* The substrate: The type of substrate will also affect the choice of glue. For example, contact cement is not suitable for use on porous substrates, such as particleboard.
* The application method: If you are applying the edge banding by hand, you will need a glue that is easy to apply and does not set too quickly. Hot melt glue is a good option for hand-applied edge banding. If you are using a machine to apply the edge banding, you can use either hot melt glue or contact cement.

Applying the GlueOnce you have chosen the right glue, you can begin applying it to the edge banding and the substrate.
For hot melt glue:
1. Heat the glue gun to the temperature specified by the manufacturer.
2. Apply a thin bead of glue to the edge of the edge banding.
3. Immediately press the edge banding onto the substrate, aligning it carefully.
4. Hold the edge banding in place until the glue has set.
For contact cement:
1. Apply a thin coat of contact cement to both the edge banding and the substrate.
2. Allow the contact cement to dry for the time specified by the manufacturer.
3. Bring the two surfaces together and press them firmly together.
4. Hold the edge banding in place until the contact cement has set.

Tips for Applying Glue to Edge Banding* Apply a thin, even coat of glue. Too much glue can create a mess and make it difficult to align the edge banding.
* Be careful not to get glue on the surface of the substrate. If you do, wipe it off immediately with a damp cloth.
* If you are applying the edge banding by hand, use a roller or a squeegee to help spread the glue evenly.
* If you are using a machine to apply the edge banding, make sure that the glue is applied evenly and that the machine is set to the correct temperature.
* Allow the glue to set completely before trimming the edge banding. Trimming the edge banding too soon can cause the glue to fail and the edge banding to come loose.

2025-02-02

---

Previous：How to Choose the Right Cabinet Door Edge Banding for Your Project

Next：How Much Do Edge Banding Factory Workers Make in China?