How to Join Edge Banding Strips: Top and Bottom Techniques202

Edge banding is a thin strip of material applied to the exposed edges of furniture panels to provide a finished and protected surface. Joining edge banding strips properly is essential for a seamless and durable edge. Here are detailed guides to two common methods for joining edge banding strips: top joining and bottom joining.

Top Joining

Top joining involves applying the edge banding strip to the top edge of the panel and then folding or wrapping it around to the bottom edge. This method is suitable for panels with visible top and bottom edges, such as tabletops and countertops.Step 1: Preparation
* Cut the edge banding strip to the desired length, ensuring it extends slightly beyond the ends of the panel.
* Apply a thin layer of contact adhesive to the top edge of the panel and the underside of the edge banding strip.
Step 2: Application
* Align the edge banding strip against the top edge of the panel and press it firmly into place.
* Use a roller or burnisher to apply even pressure and ensure proper bonding.
Step 3: Folding and Trimming
* Fold or wrap the edge banding strip over the edge of the panel, ensuring it conforms to the shape.
* Trim any excess edge banding strip using a sharp knife or router.
Step 4: Finishing
* Sand the joined area lightly to smooth any rough edges or transitions.
* Apply a sealant or lacquer to protect the edge banding and enhance its appearance.

Bottom Joining

Bottom joining involves applying the edge banding strip to the bottom edge of the panel and then folding or wrapping it up to the top edge. This method is suitable for panels where the bottom edge is hidden, such as cabinet doors and drawers.Step 1: Preparation
* Cut the edge banding strip to the desired length, ensuring it extends slightly beyond the ends of the panel.
* Apply a thin layer of contact adhesive to the bottom edge of the panel and the upper side of the edge banding strip.
Step 2: Application
* Align the edge banding strip against the bottom edge of the panel and press it firmly into place.
* Use a roller or burnisher to apply even pressure and ensure proper bonding.
Step 3: Folding and Trimming
* Fold or wrap the edge banding strip up over the edge of the panel, ensuring it conforms to the shape.
* Trim any excess edge banding strip using a sharp knife or router.
Step 4: Additional Support
* For improved strength and durability, consider applying additional support to the bottom of the joined area, such as a small piece of wood or metal.
Step 5: Finishing
* Sand the joined area lightly to smooth any rough edges or transitions.
* Apply a sealant or lacquer to protect the edge banding and enhance its appearance.

Choosing the appropriate method for joining edge banding strips depends on the visibility and function of the panel. By following these detailed guides, you can achieve seamless and durable edge joints, enhancing the aesthetics and longevity of your furniture.

2025-02-03

Previous：How to Adjust the Edgebanding Allowance

Next：How to Cut Edge Banding for Corner Joints