How to Apply Edge Banding Corners268

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particleboard, or other wood products. It is used to protect the edges from damage and moisture, and it can also improve the appearance of the finished product.

Applying edge banding is a relatively simple process, but there are a few tricks to getting it right. One of the most challenging aspects is applying the banding around corners.

There are two main methods for applying edge banding around corners: the miter cut and the bullnose cut.

Miter Cut

The miter cut is the most common method for applying edge banding around corners. It is a simple and straightforward technique that produces a clean, professional-looking finish.

To apply edge banding using a miter cut, you will need the following tools:
Miter saw
Edge banding
Wood glue
Trimmer

To apply the edge banding, follow these steps:1. Cut the edge banding to the desired length using the miter saw. The miter cut should be made at a 45-degree angle.
2. Apply wood glue to the mitered edge of the edge banding.
3. Position the edge banding on the corner of the workpiece and press it into place.
4. Hold the edge banding in place for a few minutes until the glue has set.
5. Trim the excess edge banding using a trimmer.

Bullnose Cut

The bullnose cut is a more decorative method for applying edge banding around corners. It produces a rounded edge that is both attractive and durable.

To apply edge banding using a bullnose cut, you will need the following tools:
Bullnose router bit
Edge banding
Wood glue
Trimmer

To apply the edge banding, follow these steps:1. Install the bullnose router bit in your router.
2. Cut the edge banding to the desired length.
3. Apply wood glue to the edge of the workpiece.
4. Position the edge banding on the corner of the workpiece and press it into place.
5. Hold the edge banding in place for a few minutes until the glue has set.
6. Trim the excess edge banding using a trimmer.

Tips for Applying Edge Banding Around Corners
Use a sharp miter saw blade to ensure a clean cut.
Apply a thin layer of wood glue to the mitered edge of the edge banding.
Press the edge banding into place firmly and hold it for a few minutes until the glue has set.
Trim the excess edge banding using a sharp trimmer.
Take your time and be careful when applying edge banding around corners. A little patience will produce a professional-looking finish.

2025-02-04

Previous：How to Lock Wooden Door Edge Banding

Next：Panel Edge Banding vs. T-Molding: Which Is Right for You?