How to Install Tatami Edging Strips149

Tatami edging strips are essential for finishing the edges of tatami mats and providing a clean, professional look. They help to protect the mats from damage, wear, and moisture, and they can also be used to create a variety of decorative effects. Installing tatami edging strips is a relatively simple process, but there are a few things you need to know to ensure a successful installation.

Materials You'll Need* Tatami edging strips
* Measuring tape
* Pencil
* Utility knife
* Miter saw
* Wood glue
* Clamps

Instructions1. Measure and mark the edges of the tatami mats. Use a measuring tape and pencil to mark the edges of the mats where you want to install the edging strips. Make sure to measure carefully and mark the lines clearly.
2. Cut the edging strips to length. Use a miter saw to cut the edging strips to the desired length. Make sure to cut the strips at a 45-degree angle so that they will fit together snugly at the corners.
3. Apply wood glue to the edges of the mats. Apply a thin layer of wood glue to the edges of the mats where you will be installing the edging strips. Be sure to spread the glue evenly and avoid getting it on the surface of the mats.
4. Attach the edging strips to the mats. Carefully align the edging strips with the edges of the mats and press them into place. Use clamps to hold the strips in place while the glue dries.
5. Wipe away any excess glue. Use a damp cloth to wipe away any excess glue that may have squeezed out from between the edging strips and the mats.
6. Allow the glue to dry completely. Allow the glue to dry completely before using the tatami mats. This will typically take several hours.

Tips* Use a sharp utility knife to cut the edging strips. This will help to prevent the strips from fraying or tearing.
* Make sure to measure the edges of the mats carefully before cutting the edging strips. This will ensure that the strips fit properly.
* Apply a thin layer of wood glue to the edges of the mats. Too much glue can make it difficult to align the edging strips and can also cause the glue to squeeze out from between the strips and the mats.
* Use clamps to hold the edging strips in place while the glue dries. This will help to ensure that the strips adhere properly to the mats.
* Allow the glue to dry completely before using the tatami mats. This will help to prevent the edging strips from coming loose.

2025-02-05

Previous：How to Edge a Wall Mirror with Edging Strips

Next：What Thicknesses of Edge Bands Are Available in Guangzhou?