How to Remove Veneer Edge Banding with Contact Cement80

Veneer edge banding is a thin strip of veneer that is applied to the edges of plywood, MDF, or other substrates to conceal the raw edges. It is typically applied using contact cement, which is a strong adhesive that creates a permanent bond. However, there may be times when you need to remove the edge banding, such as when you are repairing the substrate or replacing the edge banding with a different material.

Removing veneer edge banding with contact cement can be a challenging task, but it is possible with the right tools and techniques. Here are the steps on how to do it:

1. Heat the edge banding: The first step is to heat the edge banding to soften the contact cement. You can use a heat gun or a hair dryer to do this. Be careful not to overheat the edge banding, as this can damage the veneer.

2. Scrape off the edge banding: Once the edge banding is heated, you can use a sharp scraper to scrape it off. Be careful not to gouge the substrate. If the edge banding is particularly stubborn, you may need to use a chisel to remove it.

3. Clean the substrate: Once the edge banding is removed, you will need to clean the substrate to remove any residual contact cement. You can use a solvent such as acetone or mineral spirits to do this. Be sure to wear gloves and a mask when using solvents.

4. Apply new edge banding: If you are replacing the edge banding, you can now apply the new edge banding. Be sure to follow the manufacturer's instructions for applying the contact cement.

Here are some tips for removing veneer edge banding with contact cement:Use a sharp scraper to avoid gouging the substrate.
Be patient and take your time. Removing edge banding can be a time-consuming process.
If the edge banding is particularly stubborn, you may need to use a chisel to remove it.
Be sure to wear gloves and a mask when using solvents.

2024-10-06

Previous：How to Install Edgebanding on a Cabinet: A Comprehensive Guide

Next：What Colors Are Available for Particle Board Edging?