How to Repair Cabinet Edge Banding27

Edge banding is a thin strip of material that is applied to the edges of plywood or particleboard to give it a finished look. It can be made from a variety of materials, including wood, plastic, and metal. Over time, edge banding can become damaged or worn, which can make your cabinets look unsightly. Fortunately, repairing edge banding is a relatively easy and inexpensive process.

Materials You Will Need* New edge banding
* Wood glue
* Clamps
* Sandpaper
* Utility knife
* Iron or heat gun
* Edge banding trimmer

Instructions1. Remove the damaged edge banding. Use a utility knife to carefully score the edge banding along the length of the cabinet. Then, use a putty knife or chisel to pry the edge banding off of the cabinet.
2. Clean the surface of the cabinet. Use sandpaper to remove any glue or debris from the surface of the cabinet.
3. Apply wood glue to the surface of the cabinet. Use a thin layer of wood glue to the surface of the cabinet where the new edge banding will be applied.
4. Place the new edge banding on the cabinet. Align the new edge banding with the edge of the cabinet and press it into place.
5. Clamp the edge banding in place. Use clamps to hold the edge banding in place while the glue dries.
6. Trim the edge banding. Once the glue has dried, use an edge banding trimmer to trim the excess edge banding from the cabinet.
7. Sand the edge banding. Use sandpaper to smooth the edge banding and make it flush with the surface of the cabinet.
8. Apply a finish to the edge banding. If desired, you can apply a finish to the edge banding to protect it from damage.

Tips* If the edge banding is badly damaged, you may need to replace the entire piece.
* If you are using wood edge banding, be sure to seal it with a clear finish to protect it from moisture.
* If you are having trouble getting the edge banding to adhere to the cabinet, you can try using a heat gun or iron to soften the glue.

ConclusionRepairing cabinet edge banding is a relatively easy and inexpensive process that can make your cabinets look like new again. By following the steps outlined in this article, you can repair your cabinet edge banding in no time.

2025-02-12

Previous：How to Fine-Tune Your Edge Banding Machine [Video]

Next：What Thicknesses of Edge Banding Are Available in Shenzhen?