How To Install Edging Strips Like a Pro296

Edging strips are an essential part of any furniture project. They help to protect the edges of your furniture from damage, and they can also add a decorative touch. But how do you install edging strips? It's actually quite easy, and we'll show you how to do it in just a few simple steps.

1. Gather Your Materials

To install edging strips, you will need the following materials:* Edging strips
* Wood glue
* Measuring tape
* Pencil
* Miter saw
* Sandpaper
* Finishing nails
* Hammer

2. Measure and Cut the Edging Strips

The first step is to measure and cut the edging strips to the desired length. Use a measuring tape to measure the length of the edge you want to cover, and then add about 1 inch to that measurement. This will give you enough overlap to ensure a secure fit. Once you have the measurement, use a pencil to mark the length on the edging strip. Then, use a miter saw to cut the edging strip to length.

3. Apply Wood Glue to the Edging Strips

Once the edging strips are cut to length, apply a thin layer of wood glue to the back of each strip. Be sure to spread the glue evenly over the entire surface of the strip.

4. Align the Edging Strips

Position the edging strips on the edge of the furniture, aligning the edges of the strips with the edges of the furniture. Press the strips into place, and use a hammer to tap them down slightly.

5. Sand the Edging Strips

Once the edging strips are in place, use sandpaper to sand them smooth. Be sure to sand both the top and bottom edges of the strips.

6. Finish the Edging Strips

Once the edging strips are sanded smooth, you can finish them with paint or stain. If you are using paint, apply a thin coat of paint to the strips and allow it to dry completely. If you are using stain, apply a thin coat of stain to the strips and allow it to penetrate for the recommended amount of time. Then, wipe off any excess stain with a clean cloth.

7. Enjoy Your New Edging Strips

Your new edging strips will now protect the edges of your furniture from damage and add a decorative touch. Enjoy!

2025-02-13

Previous：Are Profits for Edge Banding Factories in China Slim?

Next：How to Edgeband Short Edges with an Edgebanding Machine