How to Join Curved Veneer Edge Banding59

Curved veneer edge banding is a great way to add a touch of elegance and sophistication to your furniture. However, it can be tricky to get the joints just right. Here is a step-by-step guide on how to join curved veneer edge banding:
Cut the edge banding to length. Measure the length of the edge that you want to cover and cut the edge banding to that length. Make sure to add a little extra length to the ends so that you have something to work with.

Apply adhesive to the edge of the substrate. Using a thin layer of contact cement or wood glue, apply adhesive to the edge of the substrate. Make sure to spread the adhesive evenly and avoid getting it on the face of the substrate.

Apply the edge banding to the substrate. Starting at one end, carefully apply the edge banding to the substrate. Make sure to align the edge banding with the edge of the substrate and press it down firmly.

Trim the excess edge banding. Once the edge banding is applied, use a sharp utility knife to trim off the excess. Be careful not to cut into the substrate.

Sand the joint. Use a fine-grit sandpaper to smooth the joint between the edge banding and the substrate. This will help to create a seamless look.

Finish the joint. If desired, you can apply a clear finish to the joint to protect it from wear and tear.

Here are a few additional tips for joining curved veneer edge banding:
If the edge banding is very thin, you may need to use a backing strip to support it.

If the edge banding is very thick, you may need to use a router to create a rabbet joint.

If you are having trouble getting the joint to stay together, you can try using a heat gun to soften the adhesive.

Be patient and take your time. Joining curved veneer edge banding can be a challenging task, but it is worth it in the end.

With a little practice, you can master the art of joining curved veneer edge banding. This will allow you to create beautiful and unique pieces of furniture that will last for years to come.

2025-02-13

Previous：PVC Edge Banding Discoloration: How to Repair and Prevent It

Next：PVC Edge Banding: How to Prevent Discoloration