How to Apply Edge Banding179

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particleboard, or other wood products. It covers the raw edges of the wood, providing a finished look and protecting the wood from moisture and wear. Edge banding comes in a variety of materials, including wood, plastic, metal, and melamine. The most common type of edge banding is made from wood veneer, which is a thin layer of real wood that is glued to the edge of the wood product.

Applying edge banding is relatively simple, but it does require some precision and care. The following instructions will show you how to apply edge banding with a household iron.

Materials
Edge banding
Household iron
Damp cloth
Trimmer
Sandpaper

Instructions1. Prepare the wood edge. The edge of the wood should be clean and free of any dirt or debris. If the edge is rough, sand it smooth.
2. Apply adhesive to the wood edge. Use a thin coat of wood glue or contact cement to the edge of the wood. Be sure to apply the adhesive evenly.
3. Apply the edge banding. Align the edge banding with the edge of the wood and press it into place. Use a damp cloth to smooth out any wrinkles or bubbles.
4. Trim the edge banding. Once the edge banding is in place, use a trimmer to trim off any excess material. Be sure to trim the edge banding flush with the edge of the wood.
5. Sand the edge banding. Use a fine-grit sandpaper to sand the edge banding smooth. This will remove any sharp edges or splinters.
6. Finish the edge banding. The edge banding can be finished with a variety of materials, including paint, stain, or varnish. Choose a finish that matches the rest of the wood product.

Tips* Use a sharp trimmer to trim the edge banding. A dull trimmer will tear the edge banding and make it difficult to get a clean finish.
* Sand the edge banding lightly. Over-sanding will remove the finish and damage the edge banding.
* Finish the edge banding with a durable material. This will protect the edge banding from wear and tear.

ConclusionApplying edge banding is a simple and effective way to finish the edges of wood products. By following the instructions above, you can achieve a professional-looking finish that will last for years.

2025-02-22

Previous：How to Scrape Edge Banding Pictures

Next：How to Remove Anti-Counterfeiting from Edge Banding Strips