How Much Edge Banding Do I Need for Cabinets?171

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or particleboard to cover up the raw material and give the piece a more finished look. It also helps to protect the edges from moisture and wear and tear. When it comes to cabinets, the amount of edge banding you need will depend on the size of the cabinets and the type of edge banding you are using.

To calculate the amount of edge banding you need, you will first need to measure the length of the edges of the cabinet. Once you have the measurements, you can then add them together to get the total length of edge banding you need. For example, if you have a cabinet that is 24 inches wide and 36 inches high, you will need 120 inches of edge banding (24 inches x 2 + 36 inches x 2).

The type of edge banding you use will also affect the amount you need. There are two main types of edge banding: pre-glued and non-glued. Pre-glued edge banding has a layer of adhesive on one side, which makes it easy to apply. Non-glued edge banding does not have any adhesive, so you will need to apply your own adhesive before you can apply it to the cabinet.

If you are using pre-glued edge banding, you will need to cut it to the correct length before you apply it. If you are using non-glued edge banding, you can cut it to the correct length after you have applied the adhesive.

Once you have cut the edge banding to the correct length, you can apply it to the cabinet. To apply pre-glued edge banding, simply remove the backing paper and press the edge banding onto the cabinet. To apply non-glued edge banding, apply a thin layer of adhesive to the edge of the cabinet and then press the edge banding onto the adhesive.

Once the edge banding is applied, you can use a trim router to trim off any excess material. You can also use a sanding block to sand the edge banding smooth.

Here are some additional tips for calculating the amount of edge banding you need for cabinets:
If you are using pre-glued edge banding, be sure to check the manufacturer's instructions for the recommended overlap. The overlap is the amount of edge banding that should overlap the edge of the cabinet.
If you are using non-glued edge banding, be sure to apply a thin, even layer of adhesive to the edge of the cabinet before you apply the edge banding.
Once the edge banding is applied, use a trim router to trim off any excess material. You can also use a sanding block to sand the edge banding smooth.

2025-02-22

Previous：How to Miter and Join Edge Banding on Corners

Next：How to Scrape Edge Banding Pictures