How to Edge Band on Site55

Edge banding is an important part of furniture making. It helps to protect the edges of the furniture from damage and it also gives the furniture a finished look. There are several different ways to edge band furniture, but one of the most common methods is to use a portable edge bander. This machine is easy to use and it can be used on-site, which is ideal for furniture makers who need to edge band large pieces of furniture.

If you are new to edge banding, it is important to practice on a scrap piece of wood before you start working on your actual furniture. This will help you to get the hang of the machine and to avoid making any mistakes. Once you have practiced a few times, you will be able to edge band furniture quickly and easily.

Materials You Will Need* Portable edge bander
* Edge banding tape
* Flush trim bit
* Router
* Sandpaper
* Tack cloth
* Corner clamps

Steps1. Prepare the edge of the furniture. The edge of the furniture should be clean, dry, and free of any dust or debris. If the edge is not clean, the edge banding tape will not adhere properly.
2. Apply the edge banding tape. The edge banding tape should be slightly wider than the thickness of the furniture. Apply the tape to the edge of the furniture, making sure that it is straight.
3. Trim the edge banding tape. Once the edge banding tape has been applied, it needs to be trimmed. Use a flush trim bit to trim the tape flush with the edge of the furniture.
4. Sand the edge banding tape. Once the tape has been trimmed, it needs to be sanded. Use sandpaper to sand the tape until it is smooth.
5. Apply a finish. Once the tape has been sanded, it needs to be finished. Apply a clear finish to the tape to protect it from damage.

Tips* Use a sharp flush trim bit. A sharp flush trim bit will give you a clean, professional-looking cut.
* Sand the edge banding tape lightly. If you sand the tape too much, you will weaken it.
* Apply a clear finish to the tape. A clear finish will protect the tape from damage and it will also give it a glossy look.

Troubleshooting* The edge banding tape is not adhering properly. The edge of the furniture may not be clean or the tape may not be the right size.
* The edge banding tape is too thin. The tape should be slightly wider than the thickness of the furniture.
* The edge banding tape is too thick. The tape should be slightly thinner than the thickness of the furniture.
* The edge banding tape is not cut flush with the edge of the furniture. Use a sharp flush trim bit to trim the tape flush with the edge of the furniture.

2024-10-08

Previous：What is Edge Banding for Furniture?

Next：How to Edge Band with Kitchen Cabinet Edging Strips