How to Edge Band Curved Edges Using PVC Edge Banding20

When edgebanding curved edges, it is important to use a flexible edge banding material that can conform to the curve without cracking or peeling. PVC edge banding is an ideal choice for this application, as it is both flexible and durable.

To edge band a curved edge using PVC edge banding, you will need the following materials:
PVC edge banding
Adhesive
Edge banding trimmer
Sandpaper

Once you have gathered your materials, follow these steps to edge band a curved edge:1. Prepare the edge of the substrate. The edge of the substrate should be clean and free of any dust or debris. If the edge is not clean, the adhesive will not adhere properly and the edge banding may come loose.
2. Apply adhesive to the edge of the substrate. Use a thin, even coat of adhesive to the edge of the substrate. Be sure to apply the adhesive to the entire edge, including the top and bottom edges.
3. Apply the PVC edge banding to the substrate. Start by applying the edge banding to one end of the substrate. Use your fingers to press the edge banding into place, ensuring that it is flush with the edge of the substrate.
4. Trim the excess edge banding. Use an edge banding trimmer to trim the excess edge banding from the ends of the substrate. Be sure to trim the edge banding flush with the edge of the substrate.
5. Sand the edge banding. Use sandpaper to sand the edge banding smooth. This will help to remove any rough edges and create a finished look.

Once you have followed these steps, the curved edge will be edge banded and protected from damage. PVC edge banding is a durable and flexible material that is ideal for edge banding curved edges.## Additional Tips
* When choosing PVC edge banding, be sure to select a product that is the same thickness as the substrate. This will ensure that the edge banding is flush with the edge of the substrate.
* If you are edge banding a large curved edge, you may want to use a heat gun to help soften the edge banding. This will make it easier to apply the edge banding to the substrate.
* Be sure to allow the adhesive to dry completely before using the edge banded substrate. This will help to ensure that the edge banding stays in place.

2024-10-09

Previous：How to Apply Silk Screen Printing Edge Banding with Adhesive

Next：How to Edge Band Curved Profiles