How to Re-Edge Laminate with Edge Banding138

Edge banding is a thin strip of material applied to the exposed edges of a laminate surface. It serves several purposes, including enhancing the appearance of the laminate, protecting the edges from damage, and sealing the surface to prevent moisture penetration. While edge banding is typically applied during the manufacturing process, it is possible to re-edge laminate with edge banding if the original banding has become damaged or worn.

Re-edging laminate with edge banding is a relatively straightforward process, but it does require some care and precision. The following steps will guide you through the process:

1. Prepare the surface.
Clean the surface of the laminate thoroughly to remove any dirt or debris. If the existing edge banding is damaged, remove it using a utility knife or edge banding trimmer. Sand the edges of the laminate smooth using a fine-grit sandpaper.

2. Choose the right edge banding.
Select an edge banding material that matches the thickness and color of the laminate. The most common types of edge banding include PVC, melamine, and veneer. PVC edge banding is durable and easy to work with, while melamine edge banding is more resistant to heat and moisture. Veneer edge banding provides a natural wood look.

3. Apply the edge banding.
Apply a thin layer of contact cement to the back of the edge banding and to the edge of the laminate. Allow the cement to dry for a few minutes until it becomes tacky. Carefully align the edge banding with the edge of the laminate and press it into place. Use a roller or edge banding press to apply even pressure and ensure a secure bond.

4. Trim the excess edge banding.
Once the edge banding has been applied, use a sharp utility knife or edge banding trimmer to trim off any excess material. Be careful not to cut into the laminate surface.

5. Sand the edges.
Sand the edges of the laminate and edge banding smooth using a fine-grit sandpaper. This will remove any sharp edges and create a uniform appearance.

6. Seal the edges.
Apply a clear sealant to the edges of the laminate and edge banding to protect them from moisture penetration. Allow the sealant to dry completely before using the surface.

By following these steps, you can successfully re-edge laminate with edge banding and restore the appearance and functionality of your laminate surface.

2024-10-23

Previous：Reasons Why Your Edge Banding Is Peeling Off and How to Fix It

Next：How to Edge Band Inside Corners