How to Round Over Edge Banding on Wood Panels174

Edge banding is an essential part of furniture making and finishing. It helps to protect the edges of panels from damage and moisture, and it can also improve the appearance of the piece. One of the most common ways to finish edge banding is to round over the edges. This gives the piece a more finished look and feel, and it can also help to hide any imperfections in the edge banding.

There are a few different ways to round over edge banding. One way is to use a router. This is a quick and easy method, but it can be difficult to get a consistent radius on the edges. Another way to round over edge banding is to use a sanding block. This is a more time-consuming method, but it gives you more control over the radius of the edges.

No matter which method you choose, it is important to use a sharp cutting tool. This will help to prevent the edge banding from tearing or chipping. You should also use a light touch when sanding, as too much pressure can cause the edge banding to be damaged.

Using a Router to Round Over Edge Banding

To round over edge banding using a router, you will need the following tools:
A router
A round-over bit
A fence
A featherboard
Safety glasses
Ear protection

Once you have gathered your tools, follow these steps:1. Put on your safety glasses and ear protection.
2. Install the round-over bit in the router.
3. Adjust the fence so that the bit is offset from the edge of the panel by the desired amount.
4. Attach the featherboard to the fence to help keep the panel steady.
5. Turn on the router and slowly feed the panel through the bit.
6. Continue feeding the panel through the bit until the edge is rounded over.
7. Turn off the router and remove the panel from the fence.

Using a Sanding Block to Round Over Edge Banding

To round over edge banding using a sanding block, you will need the following tools:
A sanding block
Sandpaper
Safety glasses

Once you have gathered your tools, follow these steps:1. Put on your safety glasses.
2. Attach the sandpaper to the sanding block.
3. Hold the sanding block against the edge of the panel and move it back and forth until the edge is rounded over.
4. Be sure to use a light touch, as too much pressure can cause the edge banding to be damaged.
5. Continue sanding until the edge is rounded over to the desired radius.

Tips for Rounding Over Edge Banding

Here are a few tips for rounding over edge banding:
Use a sharp cutting tool. This will help to prevent the edge banding from tearing or chipping.
Use a light touch when sanding. Too much pressure can cause the edge banding to be damaged.
Be patient. It takes time to round over edge banding, so don't rush the process.
If you are using a router, be sure to use a fence and a featherboard to keep the panel steady.
If you are using a sanding block, be sure to use a sanding block that is the same size as the edge banding. This will help to prevent the edge banding from being damaged.

By following these tips, you can round over edge banding quickly and easily. This will give your furniture a more finished look and feel, and it will also help to protect the edges of the panels from damage and moisture.

2024-10-23

Previous：How to Join Round Table Edge Banding

Next：How to Apply Engineered Wood Veneer Edge Banding