How to Glue Edgebanding on Furniture240

Edgebanding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other wood panels to give them a finished look. It can be made from a variety of materials, including wood, plastic, or metal. Edgebanding can be glued on using a variety of adhesives, including contact cement, wood glue, or hot melt glue.

The process of gluing on edgebanding is relatively simple, but it does require some care and precision. Here are the steps on how to glue edgebanding on furniture:
Prepare the surface. The first step is to prepare the surface of the wood panel by sanding it smooth. This will help the adhesive to bond better.
Apply the adhesive. Once the surface is prepared, apply a thin layer of adhesive to the edge of the wood panel. Be sure to use an adhesive that is compatible with the type of edgebanding you are using.
Apply the edgebanding. Carefully align the edgebanding with the edge of the wood panel and press it into place. Use a roller or a J-roller to apply pressure evenly along the entire length of the edgebanding.
Trim the excess. Once the edgebanding is in place, use a sharp knife or a flush trim bit to trim off the excess.
Sand the edges. Finally, sand the edges of the edgebanding smooth. This will help to blend it in with the rest of the wood panel.

Here are some additional tips for gluing on edgebanding:
Use a sharp knife or a flush trim bit to trim the excess edgebanding. This will help to prevent the edgebanding from chipping or peeling.
Sand the edges of the edgebanding smooth. This will help to blend it in with the rest of the wood panel.
Apply a thin coat of finish to the edgebanding. This will help to protect it from wear and tear.

Gluing on edgebanding is a relatively simple process, but it does require some care and precision. By following these steps, you can achieve a professional-looking finish on your furniture.

2024-10-24

Previous：How to Replace Edge Banding on Furniture

Next：[Slant Edge Edging – How Wide Are the Bands?]