How to Replace Edge Banding on Furniture394

Edge banding is a thin strip of material that is applied to the exposed edges of furniture to protect them from damage and enhance their appearance. Over time, edge banding can become worn, damaged, or discolored, and may need to be replaced. Replacing edge banding is a relatively simple process that can be completed with a few basic tools and materials.

Materials you will need:
Replacement edge banding
Iron or heat gun
Edge banding trimmer
Sandpaper
Tack cloth
Optional: PVA glue

Instructions:
Prepare the edge of the furniture. Remove any old edge banding by carefully scraping it off with a chisel or utility knife. Sand the edge of the furniture to remove any remaining adhesive or debris.
Apply adhesive to the edge of the furniture. If you are using PVA glue, apply a thin layer to the edge of the furniture using a brush or roller. Allow the adhesive to become tacky before proceeding.
Apply the edge banding. Cut the edge banding to the desired length and press it firmly onto the edge of the furniture. Use a heated iron or heat gun to activate the adhesive and bond the edge banding to the furniture.
Trim the edge banding. Use an edge banding trimmer to trim the excess edge banding flush with the edge of the furniture. Be careful not to trim too much, as this could damage the edge banding.
Sand the edge banding. Use sandpaper to smooth the edge banding and remove any sharp edges. Start with a coarse grit sandpaper and gradually work your way to a finer grit.
Clean the edge banding. Wipe the edge banding with a tack cloth to remove any dust or debris. This will help to ensure a smooth, professional-looking finish.

Tips:
When choosing replacement edge banding, be sure to select a material that is compatible with the type of furniture you are repairing.
If you are using heat to apply the edge banding, be sure to use a low setting to avoid damaging the material.
Allow the edge banding to cool completely before trimming it. This will help to prevent the material from shrinking or warping.
If you are unsure about any of the steps involved in replacing edge banding, it is best to consult with a professional.

By following these steps, you can easily replace edge banding on your furniture and restore its original appearance.

2024-10-24

Previous：Why Your Wardrobe Edging Looks Awful and What You Can Do About It

Next：How to Glue Edgebanding on Furniture