How to Cut Edge Banding85

Edge banding is a thin strip of material that is applied to the edges of furniture and other wood products to give them a finished look. It can be made from a variety of materials, including wood, plastic, and metal. Edge banding can be cut to length using a variety of tools, including a miter saw, a table saw, and a band saw.

Miter saw: A miter saw is a power tool that is used to cut angles. It can be used to cut edge banding at a 45-degree angle, which is the most common angle for edge banding. To use a miter saw to cut edge banding, first measure and mark the length of the edge banding that you need. Then, set the miter saw to a 45-degree angle. Place the edge banding on the miter saw table and align the mark with the saw blade. Hold the edge banding securely with one hand and slowly lower the saw blade into the edge banding with the other hand. Once the saw blade has cut through the edge banding, release the trigger and allow the saw blade to return to its starting position.

Table saw: A table saw is a power tool that is used to cut straight lines. It can be used to cut edge banding to length. To use a table saw to cut edge banding, first measure and mark the length of the edge banding that you need. Then, set the table saw blade to the height of the edge banding. Place the edge banding on the table saw table and align the mark with the saw blade. Hold the edge banding securely with one hand and slowly feed it into the saw blade with the other hand. Once the saw blade has cut through the edge banding, release the trigger and allow the saw blade to return to its starting position.

Band saw: A band saw is a power tool that is used to cut curves. It can be used to cut edge banding to length. To use a band saw to cut edge banding, first measure and mark the length of the edge banding that you need. Then, set the band saw blade to the height of the edge banding. Place the edge banding on the band saw table and align the mark with the saw blade. Hold the edge banding securely with one hand and slowly feed it into the saw blade with the other hand. Once the saw blade has cut through the edge banding, release the trigger and allow the saw blade to return to its starting position.

Once you have cut the edge banding to length, you can apply it to the edges of your furniture or other wood products. There are a variety of adhesives that can be used to apply edge banding, including wood glue, contact cement, and epoxy. Once the adhesive has dried, the edge banding will be securely attached to the edges of your furniture or other wood products.

Here are some additional tips for cutting edge banding:
Use a sharp saw blade. A dull saw blade will make it more difficult to cut the edge banding cleanly.
Cut the edge banding slowly. Cutting the edge banding too quickly can cause it to tear or splinter.
Hold the edge banding securely. Holding the edge banding securely will help to prevent it from moving while you are cutting it.
Wear safety glasses. Safety glasses will help to protect your eyes from flying wood chips.

By following these tips, you can easily cut edge banding to length and apply it to the edges of your furniture or other wood products.

2024-11-01

Previous：How to Remove Edging Strips from Chinese Furniture

Next：How to Glue Edge Banding