How to Replace Edging on Furniture13

Edging, also known as banding or trim, is an essential component of furniture construction that serves both functional and aesthetic purposes. It protects the exposed edges of furniture from damage, creates a finished look, and enhances the overall appearance of the piece.

Over time, edging can become damaged, faded, or simply outdated. Replacing edging is a relatively simple DIY project that can refresh the look of your furniture and extend its lifespan. Here's a step-by-step guide on how to replace edging on furniture:

Materials You'll Need:* New edging material
* Tape measure
* Utility knife
* Sandpaper or sanding block
* Contact cement
* Rag or brush
* Heat gun or hair dryer (optional)

Step 1: Measure and Cut the New Edging* Start by measuring the length of the edge you need to cover.
* Cut the new edging material to the desired length using a sharp utility knife.
* If the edging is not pre-applied with adhesive, apply contact cement to the back of the edging and allow it to dry partially according to the manufacturer's instructions.

Step 2: Remove the Old Edging* Using a utility knife or a thin putty knife, carefully pry up the old edging from the furniture surface.
* Remove any remaining adhesive or residue with sandpaper or a sanding block.

Step 3: Clean the Edge* Wipe down the exposed edge of the furniture with a damp rag to remove any dust or debris.
* Allow the edge to dry completely.

Step 4: Apply Contact Cement* Apply a thin layer of contact cement to the edge of the furniture.
* Allow the cement to dry partially according to the manufacturer's instructions.

Step 5: Press on the New Edging* Align the new edging with the edge of the furniture.
* Press firmly on the edging to ensure a secure bond.

Step 6: Trim the Excess* Use a utility knife to trim any excess edging that extends beyond the edge of the furniture.

Step 7: Seal the Edge (Optional)* To enhance the durability of the edging, you can seal it with a clear finish such as polyurethane or acrylic lacquer.
* Apply a thin layer using a brush or rag, following the manufacturer's instructions.

Tips:* Choose edging material that complements the style and finish of your furniture.
* Use a heat gun or hair dryer to soften the edging and make it more pliable, especially when working with curves.
* If you're replacing edging on laminated furniture, be careful not to damage the laminate surface.
* Allow ample time for the contact cement to dry before pressing on the new edging.
* If you're unsure about any part of the process, consult a professional furniture repairer or cabinetmaker.

2024-11-07

Previous：How to Replace Edge Banding on Furniture

Next：Edge Banding: How to Install It Like a Pro