How to Replace Edge Banding on Furniture150

Edge banding is an essential part of furniture construction as it conceals the exposed core of the wood panel, providing a finished and polished look. Over time, edge banding can become damaged or worn, affecting the overall aesthetics and durability of the furniture. Replacing damaged edge banding is a relatively straightforward task that can restore the piece's appearance and extend its lifespan.

Here's a step-by-step guide on how to replace edge banding:

Materials You'll Need:- New edge banding
- Utility knife
- Scraper
- Sandpaper (120-grit and 220-grit)
- Iron or heat gun
- Edge banding trimmer

Step 1: Remove the Damaged Edge Banding- Use a utility knife to carefully score the old edge banding along its length.
- Insert a scraper into the score and gently pry the edge banding away from the wood panel.
- Be cautious not to damage the surface of the wood panel.

Step 2: Clean the Edge of the Wood Panel- Use sandpaper (120-grit) to remove any adhesive residue or remnants of the old edge banding from the edge of the wood panel.
- Ensure the surface is clean and smooth.

Step 3: Apply Adhesive- Apply a thin layer of wood glue or contact cement to the edge of the wood panel.
- Use a small brush or spatula to spread the adhesive evenly.
- Allow the adhesive to dry slightly before applying the new edge banding.

Step 4: Apply the New Edge Banding- Align the new edge banding with the edge of the wood panel and press it firmly into place.
- Use a rolling pin or edge banding roller to ensure good adhesion.
- Trim any excess edge banding using an edge banding trimmer or utility knife.

Step 5: Heat the Edge Banding- Use an iron set to medium heat or a heat gun to heat the edge banding.
- Move the iron or heat gun along the length of the edge banding, applying gentle pressure.
- This will activate the adhesive and create a stronger bond.

Step 6: Sand the Edge Banding- Once the adhesive has cooled, use sandpaper (220-grit) to smooth the edge banding.
- Sand with the grain of the wood to achieve a professional finish.

Step 7: Finishing Touches- If desired, you can apply a stain, paint, or clear finish to match the existing furniture finish.
- Use a soft cloth to apply the finish and let it dry according to the manufacturer's instructions.

Tips:- Choose edge banding that matches the thickness and color of the original edge banding.
- Apply the adhesive sparingly to avoid excess glue seeping out.
- Use a straight edge to ensure the new edge banding is applied evenly.
- If the edge banding is particularly thick, you may need to use a chisel to remove the old edge banding.
- Allow the furniture to sit for 24 hours before using it to ensure the adhesive has fully cured.
Replacing edge banding on furniture is a cost-effective way to restore its appearance and functionality. By following these steps carefully, you can achieve professional-looking results and extend the life of your furniture.

2024-11-07

Previous：How Light Strips Can Be Used to Seal Furniture Edges

Next：How to Replace Edging on Furniture