How to Install Picture Frame Molding339

Picture frame molding, also known as hanging strips, is a decorative and functional element that adds a finishing touch to your framed artwork. Installing picture frame molding is a relatively simple task that can be completed in a few hours with the right tools and materials.

Materials You'll Need* Picture frame molding
* Miter saw
* Measuring tape
* Pencil
* Clamps
* Wood glue
* Nails or screws
* Hammer or drill

Step 1: Measure and Cut the Molding* Measure the length of the sides of the frame where you want to install the molding.
* Transfer the measurements to the molding and mark the cutting points with a pencil.
* Use a miter saw to cut the molding at a 45-degree angle at each end.

Step 2: Dry Fit the Molding* Place the cut pieces of molding on the frame to ensure they fit properly.
* Make any necessary adjustments to the cuts.

Step 3: Apply Wood Glue* Apply a thin bead of wood glue to the back of the molding.
* Position the molding on the frame and press it firmly into place.

Step 4: Clamp the Molding* Use clamps to hold the molding in place while the glue dries.
* Allow the glue to dry for at least 30 minutes.

Step 5: Secure the Molding* Drive nails or screws through the molding into the frame.
* Space the nails or screws evenly apart, about 12 inches apart.
* Countersink the nails or screws slightly below the surface of the molding.

Additional Tips* For a more secure hold, use both nails and screws.
* If the molding is not perfectly cut, you can use wood filler to fill in any gaps.
* Paint or stain the molding to match the frame or your decor.
* Add a layer of clear varnish to protect the molding from scratches and wear.

Frequently Asked Questions* What type of molding should I use?
There are many different types of picture frame molding available, so choose one that complements the style of your frame and artwork.
* How high should I hang the molding?
The ideal height for picture frame molding is about 5-8 inches above the top of the frame.
* Can I install picture frame molding on a curved frame?
Yes, you can use flexible molding to install picture frame molding on a curved frame.
* How do I remove picture frame molding?
To remove picture frame molding, gently pry it away from the frame using a thin tool, such as a putty knife or a screwdriver.

2025-01-16

Previous：How to Apply Edge Banding to Plywood

Next：How to Repair Cracked Veneer on Furniture