How to Use a Knife to Trim Veneer Edge Banding101

Veneer edge banding is a thin strip of wood that is used to cover the exposed edges of plywood or other wood panels. It is a popular way to give a finished look to furniture and other woodworking projects. Veneer edge banding can be applied with a variety of adhesives, but the most common method is to use a hot melt glue. Once the glue is applied, the edge banding is pressed into place and trimmed flush with the surface of the wood.

There are a number of different tools that can be used to trim veneer edge banding, but the most common is a sharp knife. A sharp knife will give you a clean, precise cut, and it is the best way to ensure that the edge banding is flush with the surface of the wood. To trim veneer edge banding with a knife, follow these steps:
Score the edge banding with a sharp knife. This will help to prevent the edge banding from tearing when you cut it.
Hold the knife at a 45-degree angle to the edge of the wood. This will help to create a beveled edge on the edge banding.
Cut the edge banding flush with the surface of the wood. Be careful not to cut too deeply into the wood.
Sand the edge of the edge banding to smooth it out. This will help to create a finished look.

Here are some additional tips for trimming veneer edge banding with a knife:
Use a sharp knife. A dull knife will tear the edge banding and make it difficult to get a clean cut.
Hold the knife at a 45-degree angle to the edge of the wood. This will help to create a beveled edge on the edge banding, which will make it less likely to chip or tear.
Cut slowly and carefully. Don't try to cut through the edge banding in one pass. Take your time and make sure that you are cutting straight.
Sand the edge of the edge banding to smooth it out. This will help to create a finished look.

With a little practice, you can learn to trim veneer edge banding with a knife quickly and easily. This is a valuable skill that can be used to add a professional touch to your woodworking projects.

2025-01-20

Previous：How to Evaluate the Quality of Edge Banding

Next：How to Cut Round Holes in Edge Banding